A good presentation is not a pile of attractive slides. It is a short, clear story that leaves the audience with one main idea, while the slides support what you say. Teachers and examination panels look at logic and content first and at design second.
This guide walks school, college and university students through ten practical steps, a sample outline, a simple way to calculate the number of slides, a pre-submission checklist and the mistakes that most often cost marks.
Before you start: answer three questions
Before you open PowerPoint or browse templates, write down answers to these three questions. It takes five minutes and saves hours.
- Who is the audience? Classmates, a teacher, an academic board or a client each need a different level of depth and vocabulary.
- How much time do you have? A five-minute talk and a twenty-minute lecture need completely different structures.
- What should people remember? Write it as one sentence, for example: "The Aral Sea shrank mainly because of irrigation."
The answer to question three is your key message. Every slide should serve it.
How to make a presentation in 10 steps
1. Narrow the topic
"Economics" or "Computers" is too broad and leads to a shallow overview. Make it specific: "The growth of digital payments in Uzbekistan" or "How AI is used in medical diagnosis". A narrow topic gives you deeper, more interesting content.
2. Collect your material
Use textbooks, academic articles, official websites and statistics. Note the source of every fact and number as you go — you will need a references slide at the end. Wikipedia is fine as a starting point, not as your only source.
3. Build an outline
The classic structure has three parts:
- Introduction — topic, why it matters, what you will cover.
- Main body — two to four sections, one key point each.
- Conclusion — main findings and the one message to take away.
For more help, see our guide on how to write an outline.
4. Work out the slide count
The basic rule is one slide per minute. A ten-minute talk needs about 8–12 slides. For detailed tables by talk length, read how many slides you need.
5. Write a headline for each slide
Write the titles first — they are the skeleton. A good headline states the point: "Cotton production rose sharply after 1960" is far stronger than "Cotton".
6. Keep the text short
Do not paste paragraphs onto slides. Aim for three to five bullet points of six to eight words each. The detail belongs in your voice, not on the screen.
7. Add visuals
A photo, chart, table or diagram often says more than a paragraph. Numbers become charts, processes become diagrams, comparisons become tables.
8. Choose a design
Use one template for the whole deck, two or three colours and one or two fonts. Match the style to the subject — a lab look for chemistry, a classic look for history. Font sizes, contrast and the "6x6 rule" are covered in our slide design rules.
9. Check and edit
Check spelling, numbers, dates and names. Open the file on another computer or phone. Exporting to PDF is the safest way to keep fonts and layout intact.
10. Rehearse
Practise out loud at least two or three times with a timer. Tips on nerves and handling questions are in how to give a presentation.
Sample outline: a 10-slide presentation
Example topic: "Renewable energy sources".
| # | Slide type | Content |
|---|---|---|
| 1 | Title | Topic, author, group, institution |
| 2 | Introduction | Why the topic matters |
| 3 | Agenda | What the talk will cover |
| 4 | Main body | Solar power: how it works |
| 5 | Main body | Wind power: pros and cons |
| 6 | Main body | Hydropower |
| 7 | Comparison | Table comparing the sources |
| 8 | Quote or fact | A striking fact to hold attention |
| 9 | Conclusion | Three key takeaways |
| 10 | Closing | "Thank you", references |
This pattern works for almost any subject — biology, history, economics and more.
What goes on the title slide
The first slide is the face of your work. It usually includes:
- the presentation title (large and clear);
- the author's full name;
- class or group;
- the institution (often required at university);
- the supervisor or teacher, if needed.
Do not clutter it with tiny text or extra logos.
8 common mistakes
- Too much text. People read instead of listening to you.
- Reading the slides aloud. Slides help the audience; they are not your script.
- Small fonts. At least 24 pt for body text and 32–40 pt for titles.
- Low contrast. White text on a pale yellow background disappears on a projector.
- A different look on every slide. The deck feels messy.
- Stretched, low-quality images. Fewer but sharper is better.
- Too many animations. Flying words distract from the content.
- Ignoring the time limit. Twenty-five slides for five minutes is the classic error.
Final checklist
Before you submit, confirm that:
- the key message fits in one sentence;
- the title slide shows the topic and author;
- the number of slides matches the time limit;
- each slide has three to five bullets and no long paragraphs;
- fonts are large and consistent;
- images are sharp and relevant;
- facts and figures are checked and sources are listed;
- there are no spelling mistakes;
- there is a conclusion slide;
- the file is saved as PDF and opened on another device;
- you have rehearsed at least twice with a timer.
Making a presentation with AI
Many students now create the first draft of a presentation with AI. It is especially useful when time is short: the AI produces the structure, text and layout quickly, and you spend your time checking, adding your own examples and rehearsing.
Aqlly is an AI presentation maker that runs as a Telegram bot. To create a presentation:
- Open @aqllyrobot in Telegram and press /start.
- Choose the interface language (Uzbek, Russian or English).
- Pick the "Presentation" service.
- Enter the topic, number of slides (5–15), presentation language and author name.
- Pick a template in the visual picker — over 100 design templates across 15 subject categories, in light and dark themes.
- In about one to three minutes the finished PDF arrives in the chat.
The AI writes the content, adds relevant images and lays out the title, section, content, quote and closing slides. New users get a 3,000 so'm welcome bonus, which covers one presentation of up to ten slides. See pricing for details.
Important: an AI-generated deck is a draft. Read it, check the facts, add your own examples and adapt it to your institution's requirements. That way the work becomes genuinely yours and you can answer questions with confidence.
Tips for different situations
| Situation | Focus on |
|---|---|
| School lesson (5–7 min) | 6–8 slides, more images, simple language |
| University seminar (10 min) | 10–12 slides, definitions, examples, sources |
| Conference talk (15 min) | Research results, charts, a clear conclusion |
| Thesis defence | Aim, objectives, methods, results — see thesis defence presentation |
| Teacher's lesson | Questions for the class, a review slide |
Summary
Making a presentation is a process: purpose and audience, outline and headlines, content and visuals, design, checking and rehearsal. If every slide serves one idea and the slide count fits your time, the result will be convincing.
Short on time? Build the first version in the Aqlly bot in a few minutes and spend the rest on editing and practice.